Components you'll need:
PVC strip curtains
Mounting hardware (generally incorporated Along with the curtains)
Tape evaluate
Pencil or marker
Drill
Screws
Action 1: Measure the doorway
Use a tape measure to ascertain the peak and width on the doorway the place you should set up the PVC strip curtains. Ensure that you measure the width of the doorway at the best, Center, and bottom, and utilize the widest measurement.
Move 2: Slice the PVC strips to size
Using the measurements from move one, Lower the PVC strips to the appropriate duration. When you've got many strips to cut, think about using a straight edge and also a utility knife to speed up the procedure.
Action 3: Attach the mounting components
Using a drill and screws, connect the mounting hardware to the best on the doorway. here Make certain the components is degree and protected.
Phase 4: Hang the PVC strips
Start out at a single facet in the doorway and cling the PVC strips through the mounting hardware. Be sure the strips are evenly spaced and hang straight. If important, modify the strips by sliding them together the mounting hardware.
Action 5: Trim the strips
If any from the strips are far too extended, utilize a pair of scissors or possibly a utility knife to trim them to the right length.
Action 6: Finish the installation
The moment each of the PVC strips are hung and here trimmed, be certain They can be thoroughly aligned and modify them as wanted. You may also need to insert a weight bar to the bottom with the curtains to maintain them from swinging within the breeze.
That is it! You now have PVC strip curtains put in in your doorway.